Lubricants
1 kg
High Performance Grease
Art. No: W150222
High Performance Grease is a combination of high temperature resistant lithium complex soap and highly refined mineral oils. Formulated with high viscosity base oils, it has a high load carrying capacity.
Details
18 kg
General Purpose Food Grease
Art. No: W150204-18
It is a food approved grease used for lubrication and corrosion prevention in parts in contact with food. Transparent and odourless.
Details
1 kg
Silicone Grease H1
Art. No: W150212-1
NSF H1 approved fully synthetic silicone oil developed for food industry. It has high thermal resistance and excellent resistance to water and water vapour.
Details
16 kg
General Purpose Bearing Grease
Art. No: W150205-16
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
Details
400 ml - gray
Anti-Seize Metal Spray
Art. No: W160100
IMPA. CODE: 450846
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
25 kg
Silicone Grease
Art. No: W150211-25
Silicone grease used for filling and lubrication in the combination of plastic, metal and rubber materials. It is odourless. Delays dirt and moisture, reduces noise.
Details
400 ml
Rubber & Plastic Maintenance Spray
Art. No: W150151
It is a special oil formulated to remove nicotine, soot and dirt from surfaces such as rubber, plastic and PVC.
Details
500 g - copper
Anti-Seize Copper Montage Paste
Art. No: W150201
IMPA. CODE: 450891
It is an assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant to washing with pressurised water.
Details
1 kg
Marine Grease
Art. No: W150213
It is a calcium sulphonate complex oil developed especially for the steel industry. It is formulated to lubricate bearings and bearings exposed to heavy loads and high temperatures under wet conditions.
Details
16 kg
High Temperature Grease 700°C
Art. No: W150218-16
In addition to its multi-purpose use, it is also used as assembly paste, lubricant and separating agent at high temperatures. Compared to similar products, the molybdenum disulphide content is much higher.
Details
400 ml
PTFE Dry Lubrication Spray
Art. No: W150130
IMPA. CODE: 450825
It is a colourless, PTFE-containing dry film lubricant for metal, rubber, plastic and other materials. Ideal for applications where grease cannot be used due to pollution and aesthetics. Suitable for use in the electrical, plastics, textile and automotive industries
Details
400 ml - transparent
Silicone Mold Release Spray
Art. No: W160118
Details
1 kg
Multi Grease Special White
Art. No: W150224
It is a grease with lithium soap and white solid lubricant content formulated with quality base oils and specially developed additives.
Details
30 l
High Temperature Chain Oil
Art. No: W600540
Provides effective lubrication by penetrating into the metal on the applied surface. Prevents corrosion, jamming, bimetal corrosion and noise problems. Does not migrate from the applied surface, has an upper resistance temperature of +250°C. It is especially ideal for high speed chains and ropes.
Details
400 ml - copper
Anti-Seize Copper Spray
Art. No: W160101
IMPA. CODE: 450565
Spray assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant against water, petrol, oil, grease and gases.
Details
400 ml
Universal Rust Remover Spray
Art. No: W160171
Details
1 kg - gray
Anti-Seize Metal Paste
Art. No: W150219
IMPA. CODE: 450874
It is a heavy metal and silicone free metal additive mounting paste. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
400 ml
MoS₂ Dry System Lubrication Spray
Art. No: W160109
IMPA. CODE: 450832
It is a spray product that provides dry film lubrication in equipment with sliding friction. Thanks to MoS2 additive, it reduces friction in systems operating under heavy load. For best results, it is important that the application surfaces are clean and dry.
Details
400 ml
MOS2 Gear Whell Spray
Art. No: W160104
IMPA. CODE: 450578
It is a black coloured grease that provides good adhesion to the surface under difficult conditions such as pressure and friction.
Details
400 ml
Multi Purpose Spray
Art. No: W160110
IMPA. CODE: 450821
Mineral-based 5-function spray lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
1 kg
High Temperature Grease 700°C
Art. No: W150218
In addition to its multi-purpose use, it is also used as assembly paste, lubricant and separating agent at high temperatures. Compared to similar products, the molybdenum disulphide content is much higher.
Details
400 ml
Silicone Grease Spray
Art. No: W160122
Contains methyl siloxane (silicone oil), colourless and odourless. It has excellent lubrication, insulation and protective properties on many different materials.
Details
1 kg - off white
Anti-Seize Ceramic Paste
Art. No: W150200
IMPA. CODE: 450884
It is an excellent assembly paste enriched with ceramic particles. Water repellent, excellent adhesion to surfaces. It gives excellent results on joints, bearings, chain systems, pressurized devices, etc. exposed to high temperature and pressure.
Details
400 ml - off white
Anti-Seize Ceramic Spray
Art. No: W160200
IMPA. CODE: 450847
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details